Search the Community
Showing results for tags 'Dome'.
Hi there, I'm starting an imaging program at a maritime museum. I know from speaking to colleagues that many maritime collections are not well recorded. I'm hoping to use an RTI/Photogrammetry method to record these works, and create 3D models of them for study. Because time is a major factor, I hope to optimize my image capture through automation. I will have a smallish studio, a 50mp Canon 5DS, and an excellent computer (which I'm building, optimized for photogrammetry which should support RTI). Jorge Cano at the Factum Foundation has proposed a method using just four lights (15 degrees at NSEW) to capture up to 50nm resolution. The four images are put into Adobe Substance Maker to obtain a heightmap and that is brought into GIS software for stitching and precise height/normal mapping. Whether I use Cano's method or RTI, I would like to build a folding dome capable of imaging at least an 8in x 8in section of each artwork. (I will be visiting multiple museums, so portability is important.) I will probably build my own dome, to which I will attach lights, and which will allow me to mount my camera at the center. I need guidance on what lights to use (strobe, flash, LED, etc.) and how to trigger the lights sequentially in sync with the camera's shutter. There are a lot of references to Arduino boards, custom PCBs, etc. A company called RTI-Dome in France has a fully automated system for image capture and filing. Custom Imaging also has an automated system. I don't know whether either of these can fire LEDs strong enough for larger scale objects. Any help/direction would be much appreciated. Nick Raposo americanmarineart.com
Hi all, Recently we have released to the public our Photogrammetry&RTI project that we have been working for over 2 years. We were inspired by some of your posts here with the dome approach and we decided that we should share with you our results. Our aim was to create a cheap, affordable photogrammetric modeling as well as RTI imaging device, that anyone can create and does not cost thousands of euros. Because of that, we needed multiple cameras, led lights and a step motor, which allowed us to rotate an object placed on the rotating table and take photos around it. As our device heart we used RaspberryPi 4 and 4 ArduCAM cameras. We were aiming at small objects, artifacts which are not bigger than 100-120mm. In the first iteration of our device we have used a small (32cm in diameter) dome (an aluminum bowl from IKEA….) with 40 led lights and 4 cameras. This version was successfully tested on Cyprus about 2 years ago where we gathered extremely valuable experience. In the second iteration we decided to leave the bowl approach and create a spider-like shape, with 10 arms for the led strips (12 leds on each) and 1 seperate arm for the cameras. It is much more mobile than the previous version as we can disassemble it and because of that it is easier to work with. Because in the first iteration we noticed that depth field was an issue, we decided to go with higher resolution cameras that have motorized focus, so we can use focus stacking method to increase our depth field. For the led strips we used flexible pcb which we connected together with FPC cables. We are controlling them through our shield that goes on the top of the raspberry pi 4. Below I am sending 2 links to my LinkedIn posts as I can not upload images here. https://www.linkedin.com/posts/marcin-k%C5%82%C4%99bowski-458bb5146_photogrammetry-rti-textured-activity-6766022368184860672-n2MF https://www.linkedin.com/posts/marcin-k%C5%82%C4%99bowski-458bb5146_photogrammetry-rti-ptm-activity-6766744323838013440-z9yn Thanks for inspiration guys and let us know what you think about our device. I am sure we will share some results as we will start testing and creating more RTI images for the objects. Marcin